제품
-
엣지포지션제어 기기(센서)
- Sensor / Electric Type Diagram
- Autowide Sensor AWE280A
- Photohead PH22VAS for vacuum environments
- High-temperature EPC sensor HE120A (for transparent webs)
- Ultrasonic Sensor UH05
- CMOS Linear Sensor SLH30
- Design Position Control DPC
- PHOTOHEAD PH16B / PH21
- PHOTOHEAD PH22
- ULTRASONIC SENSOR UH01 series
- Ultrasonic Autowide Sensor UHW051
- Ultrasonic Autowide Sensor UHW280
- Ultrasonic Autowide Sensor UHW500 / 700
- PHOTOHEAD PH30, PH31
- LINE FOLLOWER HEAD LH19
- LINE FOLLOWER HEAD LH110
- LINE FOLLOWER HEAD LH500
-
엣지포지션제어 기기(전기식)
- Sensor / Electric Type Diagram
- Guide roller mechanism (Electric type)
- AC servo actuator A353
- AC servo actuator A032
- AC servo actuator A152-□□□-20
- Motor-Driven Actuator K50 K50/A
- Liteguide Controller AE550/AE560
- Linear Actuator K300-200-20
- Compact Guide Roll Mechanism PGR series
- Compact Guide Roll Mechanism LCD series
- 가이드 롤 시리즈
- Liteguide Controller AE1000
- Motor-Driven Actuator K12 series
- Motor-Driven Actuator K62 K62/A
- Motor-Driven Actuator K80
-
엣지포지션제어 기기(유압식)
-
엣지포지션제어관련 기기
-
장력제어 관련 (텐션)
- Tension Control System Diagram
- Intrinsically safe explosion-proof MB tension sensor
- MJ tension sensor (for vacuum environment) MJ**VAS
- MJ tension sensor (for vacuum environment) MJ**V
- Tension Controller TC920V
- Tension Controller TC680A/D
- Open loop Tension Control System TCD030T
- Open loop Tension Control System TCD050
- Tension Meter TM310T
- Tension Meter TM340
- MG Tension Sensor
- MJ Tension Sensor
- CJ Tension Sensor
- MB Tension Sensor
- 전-공 변환기 EN40
- Other related equipment
-
레지스터 제어
-
절단위치 제어
-
기타 관련 기기
Photohead PH22VAS for vacuum environments
Overview
The PH22VAS is an EPC sensor designed to be installed in a vacuum environment. Its airtight design prevents component degradation within the sensor and stops outgassing. This design also prolongs the life of the sensor in a corrosive gas environment.
Feature
- Applicable to vacuum environment
- Sealing structure prevents outgassing
- Corrosive gas resistant
- For various web materials (transparent, opaque, and non-woven etc.)
- Installable in a vacuum chamber. Machinery cost can be reduced
Specification
| Light-emitting and lightreceiving gap | 22 mm |
|---|---|
| Detection field of view | 6 mm |
| Light source | White LED |
| Light source wavelength | Visible Lightr |
| Sensitivity | Can detect a 0.1 mm displacement in a transparent web |
| Output voltage | 0 to 4 V DC (depends on the web material) |
| Detection element | SPD |
| Power supply | ±15 V DC |
| Ambient temperature | 0 to +50°C |
| Ambient humidity | 35-85% RH (no condensation) |
| Protective structure rating | IP60 (when installed) |
| Response frequrncy | 30 Hz |
| Body material | Aluminum alloy and stainless steel |
| Mass | 1.3 kg |
고객창구
요청 및 문의사항은 이 양식을 사용하십시오.
Tokyo +81-42-660-7358
Osaka +81-6-6190-5550
