-
엣지포지션제어 기기(센서)
- Sensor / Electric Type Diagram
- Autowide Sensor AWE280A
- Photohead PH22VAS for vacuum environments
- High-temperature EPC sensor HE120A (for transparent webs)
- Ultrasonic Sensor UH05
- CMOS Linear Sensor SLH30
- Design Position Control DPC
- PHOTOHEAD PH16B / PH21
- PHOTOHEAD PH22
- ULTRASONIC SENSOR UH01 series
- Ultrasonic Autowide Sensor UHW051
- Ultrasonic Autowide Sensor UHW280
- Ultrasonic Autowide Sensor UHW500 / 700
- PHOTOHEAD PH30, PH31
- LINE FOLLOWER HEAD LH19
- LINE FOLLOWER HEAD LH110
- LINE FOLLOWER HEAD LH500
-
엣지포지션제어 기기(전기식)
- Sensor / Electric Type Diagram
- Guide roller mechanism (Electric type)
- AC servo actuator A353
- AC servo actuator A032
- AC servo actuator A152-□□□-20
- Motor-Driven Actuator K50 K50/A
- Liteguide Controller AE550/AE560
- Linear Actuator K300-200-20
- Compact Guide Roll Mechanism PGR series
- Compact Guide Roll Mechanism LCD series
- 가이드 롤 시리즈
- Liteguide Controller AE1000
- Motor-Driven Actuator K12 series
- Motor-Driven Actuator K62 K62/A
- Motor-Driven Actuator K80
-
엣지포지션제어 기기(유압식)
-
엣지포지션제어관련 기기
-
장력제어 관련 (텐션)
- Tension Control System Diagram
- Intrinsically safe explosion-proof MB tension sensor
- MJ tension sensor (for vacuum environment) MJ**VAS
- MJ tension sensor (for vacuum environment) MJ**V
- Tension Controller TC920V
- Tension Controller TC680A/D
- Open loop Tension Control System TCD030T
- Open loop Tension Control System TCD050
- Tension Meter TM310T
- Tension Meter TM340
- MG Tension Sensor
- MJ Tension Sensor
- CJ Tension Sensor
- MB Tension Sensor
- 전-공 변환기 EN40
- Other related equipment
-
레지스터 제어
-
절단위치 제어
-
기타 관련 기기
Ultrasonic Sensor UH05
Overview
Compact, Neat Design
Release of Space-Saving Ultrasonic Sensor
The Ultrasonic Sensor UH05 is an EPC (Edge Position Control) sensor developed for use with transparent film and photosensitive materials. Its installation in a space-saving space has become possible, which was difficult until now, and the designability has been improved so that it fits neatly into a compact machine. It can detect the edge of a web with high accuracy and is not affected by irregularities in the coating near the edge of transparent film and printed patterns. Conventional optical sensors cannot do this. The UH05 Ultrasonic Sensor can be combined with Nireco’ s controller to configure an electrical EPC system or an electrohydraulic EPC system. The recess length of the UH05 (the distance from the detection center position to the inner side of the casing) is fixed at 30 mm.
Feature
- Ultrasonic Sensor
- Reliable, proven stable detection is possible
- Space saving and lightweight
- It is widely applicable to photosensitive materials and opaque and transparent base materials
- It can also be installed under a clean environment
- RoHS / CE (EU) Certified Product
Specification
| Detection gap | 35 mm |
|---|---|
| Effective detection length | 8 mm |
| Frequency response | 200 Hz |
| Sensor output | Hi mode : When the sensor is fully obstructed:0 V; When fully unobstructed: +5 VDC Lo mode : When the sensor is fully obstructed:0 mV; When fully unobstructed: + 300 mVDC * The factory default setting is Hi mode. Load resistance: 2 kΩ or greater |
| Power supply voltage | + 15 VDC (100 mA) ‒ 15 VDC (50 mA) |
| Ambient operating temperature | 0 to +50°C |
| Ambient humidity | 35 to 85% RH (no condensation) |
| Mass | Sensor head : 0.26 kg Cable (5m) : 0.36 kg Screw guider : 0.63 kg |
고객창구
요청 및 문의사항은 이 양식을 사용하십시오.
