-
엣지포지션제어 기기(센서)
- Sensor / Electric Type Diagram
- Autowide Sensor AWE280A
- Photohead PH22VAS for vacuum environments
- High-temperature EPC sensor HE120A (for transparent webs)
- Ultrasonic Sensor UH05
- CMOS Linear Sensor SLH30
- Design Position Control DPC
- PHOTOHEAD PH16B / PH21
- PHOTOHEAD PH22
- ULTRASONIC SENSOR UH01 series
- Ultrasonic Autowide Sensor UHW051
- Ultrasonic Autowide Sensor UHW280
- Ultrasonic Autowide Sensor UHW500 / 700
- PHOTOHEAD PH30, PH31
- LINE FOLLOWER HEAD LH19
- LINE FOLLOWER HEAD LH110
- LINE FOLLOWER HEAD LH500
-
엣지포지션제어 기기(전기식)
- Sensor / Electric Type Diagram
- Guide roller mechanism (Electric type)
- AC servo actuator A353
- AC servo actuator A032
- AC servo actuator A152-□□□-20
- Motor-Driven Actuator K50 K50/A
- Liteguide Controller AE550/AE560
- Linear Actuator K300-200-20
- Compact Guide Roll Mechanism PGR series
- Compact Guide Roll Mechanism LCD series
- 가이드 롤 시리즈
- Liteguide Controller AE1000
- Motor-Driven Actuator K12 series
- Motor-Driven Actuator K62 K62/A
- Motor-Driven Actuator K80
-
엣지포지션제어 기기(유압식)
-
엣지포지션제어관련 기기
-
장력제어 관련 (텐션)
- Tension Control System Diagram
- Intrinsically safe explosion-proof MB tension sensor
- MJ tension sensor (for vacuum environment) MJ**VAS
- MJ tension sensor (for vacuum environment) MJ**V
- Tension Controller TC920V
- Tension Controller TC680A/D
- Open loop Tension Control System TCD030T
- Open loop Tension Control System TCD050
- Tension Meter TM310T
- Tension Meter TM340
- MG Tension Sensor
- MJ Tension Sensor
- CJ Tension Sensor
- MB Tension Sensor
- 전-공 변환기 EN40
- Other related equipment
-
레지스터 제어
-
절단위치 제어
-
기타 관련 기기
Tension Meter TM310T
![Tension Meter TM310T](/ko/product/wp-content/uploads/sites/3/web_tm310t_main.jpg)
Overview
Easy tension settings that can be used immediately
Operation status can be known in real timedue to additional communication function
Tension meter TM310T is a compatible with Nireco’s entire line-up of tension sensors (MB, MG, MC, CD, MJ, CJ, TSA, Intrinsically safe TSA) and displays their tension readings.
The display range is from 0 to 10 kN (1,000 x 10 N). The tension signal output (0 to 10 V (0 to 5 V), or 4 to 20 mA) can be output to a sequencer, indicator, recorder or other device.
The Tension Meter TM310T quantitatively measures the tension of a running web in manufacturing and processing lines of webs such as film, textile and rubber.
Nireco tension sensors that have good accuracy and responsiveness are used. These sensors electronically measure the tiny changes that vary in proportion to the web tension. The TM310T tension meter then adds and amplifies the sensor signals and indicates the tension.
Feature
-
Enhanced operability through digital processing
When initializing, various parameters can be set via a dialogue system.
-
Auto-zero control function
Zeroing the sensor can be done at the touch of a button.
-
Correction functions
Auto-zero, auto-span and other adjustment functions can easily be made.
-
Communications function
The TM310T’s communication function (RS-485) enables connection to a PC to allow remote monitoring.
Specification
Power source voltage | TM310T‐DC : DC24V TM310T‐AC : AC100 : 240V 50/60Hz |
---|---|
Power consumption | 25VA |
Ambient temperature operating range | 0 to +50℃ |
Ambient humidity | 80% or less (no condensation) |
Sensor power supply | +6V、±15V |
Input | 2 inputs: Any Nireco sensor from the MB, MG, MC, CD, T0, MJ , CJ , TSA series |
Output | Voltage output: 4 outputs: for control, for recording (No. 1, No. 2, Total) Current outputs: 2 outputs.. for control (4 to 20 mA) and for an indicator (1 mA) |
Warning output | 2 tension upper limits or left and right tension comparisons, lower limit warning outputs |
Telecommunications function | RS485 (2 line half duplex, 9600 bps independent protocol) |
Installation | Attached to the DIN rail |
External dimensions | (W)110×(H)90×(D)70.5 |
Mass | 1.2kg |
고객창구
요청 및 문의사항은 이 양식을 사용하십시오.