-
엣지포지션제어 기기(센서)
- Sensor / Electric Type Diagram
- Autowide Sensor AWE280A
- Photohead PH22VAS for vacuum environments
- High-temperature EPC sensor HE120A (for transparent webs)
- Ultrasonic Sensor UH05
- CMOS Linear Sensor SLH30
- Design Position Control DPC
- PHOTOHEAD PH16B / PH21
- PHOTOHEAD PH22
- ULTRASONIC SENSOR UH01 series
- Ultrasonic Autowide Sensor UHW051
- Ultrasonic Autowide Sensor UHW280
- Ultrasonic Autowide Sensor UHW500 / 700
- PHOTOHEAD PH30, PH31
- LINE FOLLOWER HEAD LH19
- LINE FOLLOWER HEAD LH110
- LINE FOLLOWER HEAD LH500
-
엣지포지션제어 기기(전기식)
- Sensor / Electric Type Diagram
- Guide roller mechanism (Electric type)
- AC servo actuator A353
- AC servo actuator A032
- AC servo actuator A152-□□□-20
- Motor-Driven Actuator K50 K50/A
- Liteguide Controller AE550/AE560
- Linear Actuator K300-200-20
- Compact Guide Roll Mechanism PGR series
- Compact Guide Roll Mechanism LCD series
- 가이드 롤 시리즈
- Liteguide Controller AE1000
- Motor-Driven Actuator K12 series
- Motor-Driven Actuator K62 K62/A
- Motor-Driven Actuator K80
-
엣지포지션제어 기기(유압식)
-
엣지포지션제어관련 기기
-
장력제어 관련 (텐션)
- Tension Control System Diagram
- Intrinsically safe explosion-proof MB tension sensor
- MJ tension sensor (for vacuum environment) MJ**VAS
- MJ tension sensor (for vacuum environment) MJ**V
- Tension Controller TC920V
- Tension Controller TC680A/D
- Open loop Tension Control System TCD030T
- Open loop Tension Control System TCD050
- Tension Meter TM310T
- Tension Meter TM340
- MG Tension Sensor
- MJ Tension Sensor
- CJ Tension Sensor
- MB Tension Sensor
- 전-공 변환기 EN40
- Other related equipment
-
레지스터 제어
-
절단위치 제어
-
기타 관련 기기
Other related equipment
BOOSTER AMPLIFER
The Booster Amplifier is capable of amplifying the control signal of the tension controller into signals necessary for operating the electromagnetic and clutch.
The TB800 booster amp amplifies the 0 to 10-V control signal output of the tension controller to a maximum of 6 A. Although the TB820 is used with the same purpose as the TB800, the TB820 has attenuation, bias, and AUTO/MAN operational features.
Booster Amplifier TB800 (Current output type)
| Input | DC 0 – 10V |
|---|---|
| Output | DC 0 – 24V (6A) |
| Power supply | AC 100V, 110V, 200V, 220V, 50/60Hz |
| Power consumption | 200VA |
| Ambient temperature | 0 – +50° |
| Weight | 5.3kg |
| Size | 187（W）×210（H）×111.2（D）mm |
PULSE GENERATORS
These are encoder-type pluse generators which measure the travelling length of the web. Two measuring systems are available: one system where the number of revolutions of the shaft of measure roll is measured, and the other system where the web travelling length is measured directly on the measure roll.
Pulse Generator (Rotary Encoder)
The pulse generator mesures the web travel length, attached to the meaure roll. Select the one that meets the following specifications.
Pulse Generator LEC-**B-G12F
| Power supply voltage | 12V DC±10% or 15V DC±10% |
|---|---|
| Current consumption | 150 mA or less |
| Output signal | High: 10V or more, Low: 1 V or less (10mA) |
| Response frequency | 10 kHz or more |
| Ambient temperature | -10 ℃ to +60 ℃ |
| Weight | 350g |
GATE GENERATOR (proximity switch)
The gate generator generates pulses for measuring the roll radius.
| Power supply voltage | 10V DC to 30 V DC |
|---|---|
| Current consumption | 10 mA or less |
| Output signal | High: 10V or more, Low: 1 V or less (10mA) |
| Response frequency | 500 Hz or more |
고객창구
요청 및 문의사항은 이 양식을 사용하십시오.
