HOMEProduct InformationLaser DeviceCustomizationScanner unit mounted type
PRODUCTS
Catalog download Discontinued products

Scanner unit mounted type

 

Overview

 

This custom model combines the HR-G10 laser head with a scanner unit, fθ lens, and dedicated marking software.

The dedicated marking software enables easy drawing of 2D barcodes, fine characters and graphics. Figures and logos can be read and edited in DXF format files.

Example of data generation and marking control by dedicated GUI

専用GUIによるデータ生成とマーキング制御の例

Application examples

2D barcode (□150um/cell), Japanese Kanji-Kana and Alphanumeric mixed, approx. 100 characters

Black anodized aluminum plate

2D barcode generated by marking software, marking time 3 seconds (marking speed 800mm/s)

実際のアプリケーション例

Nireco logo (read PNG format) 80mm wide x 12mm high, black anodized aluminum plate

Logo data is read by the marking software and converted to marking data. Marking time 40 seconds (marking speed 500mm/s)

弊社ロゴ（PNG形式を読み込み）幅80mm x 高さ12mm 、黒アルマイト処理したアルミニウム板

Main Applications

Processing on silicon wafers (soft dot processing, line drawing processing)

ビーム径約60μm
Beam diameter: approx. 60 μm
線幅約50μm
Line width approx. 50 μm

Discoloration marking on metal

二次元バーコードの例　□1cm　　色落ちしない変色加工が可能です。
Example of a 2D barcode □1cm
Discoloration processing without color fading is available.

Inner marking on resin

樹脂へのインナーマーキング
□ Example of inner marking of grid pattern in 100mm area.
It is possible to process inside the thin resin without affecting the surface.

Others

  •  
  • Lift-off, scribing, etc. in solar cell manufacturing process P2, P3.
  • Processing to PET and other thin films and films.

Specification

Wavelength532nm(Class 4 laser)
Laser average power10W以上（40kHz-200kHz)
Laser output stability±3%
No guide laserWith leakage light
Scanning methodGalvano scanning method (2 axes)
fθ lens 150mm(selectable)
Printing range□150mm (for f150mm lens)
Beam diameter50um (for f150mm lens)
Maximum scanning speed7000mm/s
(The values listed are the maximum values that can be entered. Setting value to maintain printing and quality depends on the object to be marked)
CharactersEnglish, lower case, capital letters, numbers, Japanese Hiragana & katakana, kanji (up to JIS level 2), symbols, TrueType
１D barcodeCode39, Code128, Code128A-C, Code93, ITF, US POSTNET,UPC-A, -E , EAN-8, -13, -128, GS1-128
2D barcodeECC000-140, ECC200, QR, MICRO QRコード, GS1 data bar limited composite, Dot Code
（*QR Code is a registered trademark of DENSO WAVE INC.）
GraphicsBMP, PNG, JPG, DXF, DWG, TIFF
I/O portAvailable
CommunicationUSB x2
Cooling methodAir cooling
Power inputSingle-phase AC90V-260V　50/60Hz
Power consumption600W Max
Storage temperature / humidity 1~60℃／40~70%(no condensation)
Operating temperature / humidity10~40℃／40~70%(no condensation)
Head dimensionsW196mm x H161mm x L473mm (not including protruding parts)
Controller dimensionsW196mm x H383mm x D430mm (not including protruding parts)
Operating softwareWindows XP or later (OS supported by the OS manufacturer only)
  • Examples of processing samples will be added to the home page as needed.
  • Sample processing and processing experiments are available. Please contact us for details.

Contact Us

Please use this form to submit your inquiries, feedback and/or requests to NIRECO.

Contact NIRECO ( contact form )
Tokyo +81-42-660-7387
PAGE TOP