Glue Monitor GM800

Overview Feature Specification Product catalog

Overview

The Glue Monitor GM800 can be combined with either a glue sensor for glue nozzles or a glue sensor for glue wheels, to identify the length and position of the gluing. When the gluing length is longer or shorter than the reference dimension, or if the amount of glue applied is less than the reference value, the system displays an error and outputs a relay contact. This relay contact can be used to activate a buzzer or warning light to notify the operator or to stop the machine.

Feature

There are two types: one for glue wheels (for paperboard, corrugated cardboard, and foil/vapor-deposited paperboard) and one for envelopes. Non-contact inspection.
It is not affected by the viscosity of the glue. The standard setting is done automatically. Glue wheel glue detectors are designed to be compact.
Detects on the opposite side of the glued surface.(*The GMB30 and GMH890 detect glue on the side where it is applied.)

Specification

Line speed	10～300m/min
Encoder input	Line driver resolution 1200 P/R Complimentary resolution 600 P/R * The number of pulses and the circumferential length can be changed via the touch-screen panel.
Ambient operating temperature	0～50℃
Output contact capacity	Memorization failure output (relay) a contact, AC250 V 1A、DC30 V 1A
	Inspection abnormality output (relay) a contact, AC250 V 1A, DC30 V 1A
	Delay-exceeded output (PhotoMOS) AC200 V 0.1 A, DC24 V 0.1 A
	Photo-coupler output DC24 V 40 mA (2 outputs per unit)
Power supply voltage	AC100～220V 50/60Hz(no switching required)
Power consumption	200VA
Mass	5.8kg

Contact Us

Please use this form to submit your inquiries, feedback and/or requests to NIRECO.

Contact NIRECO ( contact form )

Tokyo +81-42-660-7358

Osaka +81-6-6190-5550