-
Edge Position Control Systems(Sensors)
- Sensor / Electric Type Diagram
- Autowide Sensor AWE280A
- Photohead PH22VAS for vacuum environments
- High-temperature EPC sensor HE120A (for transparent webs)
- Ultrasonic Sensor UH05
- CMOS Linear Sensor SLH30
- Design Position Control DPC
- PHOTOHEAD PH16B / PH21
- PHOTOHEAD PH22
- ULTRASONIC SENSOR UH01 series
- Ultrasonic Autowide Sensor UHW051
- Ultrasonic Autowide Sensor UHW280
- Ultrasonic Autowide Sensor UHW500 / 700
- PHOTOHEAD PH30 / PH31
- LINE FOLLOWER HEAD LH19
- LINE FOLLOWER HEAD LH110
- LINE FOLLOWER HEAD LH500
-
Edge Position Control Systems(Electric type)
- Sensor / Electric Type Diagram
- Guide roller mechanism (Electric type)
- AC servo actuator A353
- AC servo actuator A032
- AC servo actuator A152-□□□-20
- Motor-Driven Actuator K50 K50/A
- Liteguide Controller AE550/AE560
- Linear Actuator K300-200-20
- Compact Guide Roll Mechanism PGR series
- Compact Guide Roll Mechanism LCD series
- Guide Roll Mechanism
- Liteguide Controller AE1000
- Motor-Driven Actuator K12 series
- Motor-Driven Actuator K62 K62/A
- Motor-Driven Actuator K80
-
Edge Position Control Systems(Hydraulic type)
-
EPC related components
-
Tension Control Systems
- Tension Control System Diagram
- Intrinsically safe explosion-proof MB tension sensor
- MJ tension sensor (for vacuum environment) MJ**VAS
- MJ tension sensor (for vacuum environment) MJ**V
- Tension Controller TC920V
- Tension Controller TC680A/D
- Open loop Tension Control System TCD030T
- Open loop Tension Control System TCD050
- Tension Meter TM310T
- Tension Meter TM340
- MG Tension Sensor
- MJ Tension Sensor
- CJ Tension Sensor
- MB Tension Sensor
- Electro-Pneumatic Converter EN40
- Other related equipment
-
Automaic Register Control Systems
-
Print-to-cut Register Control Systems
-
Other Related Equipment
Open loop Tension Control System TCD030T
Overview
The TCD030T is a controller for controlling the tension of a web at the unwinder or winder, without using a tension sensor. The roll diameter is calculated by using a signal from a gate generator mounted on the winding/unwinding reel, and a control signal corresponding to the change in the roll diameter is delivered.
Feature
-
Non-contact detection of roll diameter
The roll diameter is detected without any contact being made using a gate generator attached to a winding/unwinding reel. Therefore, the material is not exposed to damage.
-
Easy to operate
It is operated just by setting the roll radius and the web thickness.
-
Stop output circuit incorporated
A stop output signal is generated when stopping an unwinder. The reel is stopped without slackening the web.
-
Applicable to various brakes/clutches
It is available with voltages of 0 to 10V and currents of 4 to 20 mA for control outputs. Combined with a converter, it can control an electromagnetic brake/clutch or an air brake/clutch.
-
Applicable to very thin webs as well as to very thick webs
The web is available in thicknesses of 1 µm to 9.99 mm.
Specifications
| Radius setting | Radius: 1 to 999 mm (internal setting) |
|---|---|
| Thickness settings | 0.01 to 9.99 mm or 1 to 999 μm |
| Control output | 0 to 10V (5 mA) and 4 to 20mA DC |
| Gate generator input | “0”: 0 to 1 V or less (10 mA) “1” : 10 to 12 V 12 V system rectangular wave; one pulse per revolution of a winding/unwinding reel |
| Contact input | Start signal and stop signal Contact switching capacity: 15 V DC, 30 mA or more. |
| Power supply | 100/110/200/220 V AC ±10%, 50/60Hz |
| Power consumption | 5VA |
| Ambient temperature | 0 to +50℃ |
| Weight | 1.7kg |
Contact Us
Please use this form to submit your inquiries, feedback and/or requests to NIRECO.
