PRODUCTS
-
Edge Position Control Systems(Sensors)
- Sensor / Electric Type Diagram
- Autowide Sensor AWE280A
- Photohead PH22VAS for vacuum environments
- High-temperature EPC sensor HE120A (for transparent webs)
- Ultrasonic Sensor UH05
- CMOS Linear Sensor SLH30
- Design Position Control DPC
- PHOTOHEAD PH16B / PH21
- PHOTOHEAD PH22
- ULTRASONIC SENSOR UH01 series
- Ultrasonic Autowide Sensor UHW051
- Ultrasonic Autowide Sensor UHW280
- Ultrasonic Autowide Sensor UHW500 / 700
- PHOTOHEAD PH30 / PH31
- LINE FOLLOWER HEAD LH19
- LINE FOLLOWER HEAD LH110
- LINE FOLLOWER HEAD LH500
-
Edge Position Control Systems(Electric type)
- Sensor / Electric Type Diagram
- Guide roller mechanism (Electric type)
- AC servo actuator A353
- AC servo actuator A032
- AC servo actuator A152-□□□-20
- Motor-Driven Actuator K50 K50/A
- Liteguide Controller AE550/AE560
- Linear Actuator K300-200-20
- Compact Guide Roll Mechanism PGR series
- Compact Guide Roll Mechanism LCD series
- Guide Roll Mechanism
- Liteguide Controller AE1000
- Motor-Driven Actuator K12 series
- Motor-Driven Actuator K62 K62/A
- Motor-Driven Actuator K80
-
Edge Position Control Systems(Hydraulic type)
-
EPC related components
-
Tension Control Systems
- Tension Control System Diagram
- Intrinsically safe explosion-proof MB tension sensor
- MJ tension sensor (for vacuum environment) MJ**VAS
- MJ tension sensor (for vacuum environment) MJ**V
- Tension Controller TC920V
- Tension Controller TC680A/D
- Open loop Tension Control System TCD030T
- Open loop Tension Control System TCD050
- Tension Meter TM310T
- Tension Meter TM340
- MG Tension Sensor
- MJ Tension Sensor
- CJ Tension Sensor
- MB Tension Sensor
- Electro-Pneumatic Converter EN40
- Other related equipment
-
Automaic Register Control Systems
-
Print-to-cut Register Control Systems
-
Other Related Equipment
LINE FOLLOWER HEAD LH19
Overview
Line Follower Head LH19 is a sensor which optically detects meander of register lines or patterns printed on or edges of webs, This meander sensor can be used safely for a long time since it uses SPD as the sensing element and white LED as the light source.
Feature
- Stronger in sensing of pale blue and green than conventional sensors
- With SPD, response speed is increased and sensing accuracy during high-speed operation is improved
- Spot diameter can be adjusted easily with the slide control without changing the sensing distance
- White LED is used as the light source, which secures long and stable operation and reduces the spare parts cost
Specification
| Spotlight distance | 10mm |
|---|---|
| Detection field of view | 5 to 3mm (Spot diameter) |
| Register line width | 1.0mm or more |
| Light source | White LED |
| Light source wavelength | Visible Light |
| Output voltage | 0 to 5V DC |
| Detection element | SPD |
| Power supply | ±15V DC |
| Ambient temperature | 0 to ＋50℃ |
| Main body material | Cast Aluminum Alloy |
| Mass | Head: 400g Attached cable: 250g |
Contact Us
Please use this form to submit your inquiries, feedback and/or requests to NIRECO.
Tokyo +81-42-660-7358
Osaka +81-6-6190-5550
